Zettex Spraybond X50 is a very high quality contact adhesive without solvents or plasticisers for the adhesion of all types of EPS, XPS and PU.
- Very fast
- Solvent free
- Extremely powerful
- Fast drying
- For universal use
- Ready to use
- DCM Free
Areas of application
For the fast and effective adhesion of all solvent-sensitive surfaces such as EPS, XPS and PU.
The adhesive is completely non-corrosive. If using on a roof, it is important to check whether the adhesive is sufficiently heat resistant for the intended purpose.
Remove any moisture and grease from the surface being glued. Gently spray the contact adhesive onto both surfaces being glued. The ideal distance between the surface and the spray gun is 30 cm. Try to apply the glue in a single layer. Bring the surfaces together after 4-6 minutes and press or roller firmly. Wait at least twice as long to glue the surfaces together if the layers applied have overlapped. Check thoroughly to see whether there is sufficient contact between the glue layers if the surface is porous. Apply an extra layer, if necessary.
All surfaces should be dry and free from grease and dust